The Cwmtillery Colliery Lamp. This lamp is of the “lockable” design, to stop the miner opening it underground. It has the 5th false sliding pillar to lock the bonnet and it also has the stamp of the “Three Feathers” above the name plaque. This lamp (seen in the featured image top and left) is from the Cwmtillery No1, stamped 108 …

Six Bells Colliery – Miners Oil Lamp. A Messrs Thomas and Williams Ltd of Aberdare, miners safety oil lamp No24. Made from steel, iron and brass. Size 10″ x 3 1/2″ inches. The lamp has the name Six Bells stamped along the brass air-vents (as seen in the image left) and also on the inside at the top of the …

Miners Oil Lamp Spikes. Made from iron. Size 11″ x 1 1/2″ inches and 10″ x 1 1/2″ inches. These oil lamp spikes were used by the colliers on the coal face, they would be hammered into the timbers and the oil lamp would be hung from the hole in the spike.

An Eccles Miners Protector Lamp. Made from chrome and brass. Size 10″ x 3″ inches. These re-lightable oil lamps were used by management, deputies and overmen etc, if gas was present they were trained to check for its presence using this re-lighter. Ordinary oil lamps issued to workers were not made to be re-lit, if gas extinguished the flame they …

Miners Oil Lamp – Open Gauze Lamp. This is an open gauze miners oil lamp. Made from iron and brass. Size 9″ x 3″ inches. Date unknown, though it has some type of a locking mechanism on the oil reservoir. Lamps similar to this were often used in Germany. All parts are numbered, as original. This lamp has an open …

Two Copper Oil Flasks. Made from copper. Size, each flask is 7″ x 5″ x 1 1/2″ inches. Embossed on a small cartouche on the front of each flask are the initials B.C.Co. more than probably from the Bolsover Colliery Company.

An Oldham Cap Lamp Tool. This is a lamproom tool used by staff to take apart the cap lamp security screws. Made from plastic and steel. Size 5″ x 3/4″ inches.    

Lamproom Sealing Wax. Made from wax. Size 4″ x 1/2″ x 1/2″ inches. This sealing wax with a wick was used to seal the release pins in place in the cap-lamp bezel so that no-one could access the air tight lens and bulb to expose the electrical parts. The wick would be set alight to melt the wax enabling it …

British Lumax Auto Bulbs – Made by Ceag.  This lamp bulb and box was produced by British Lumax Auto Bulbs, made by Ceag, advertised as The Miners Lamp People. Ceag Ltd of Barnsley and London. Bulb is 6 Volt, 3 Watt A43 SCC.  Size of the box is 1 1/2″ x 1″ inches. 

Thorn Miners Lamp Bulbs. A box of 25 Thorn clear 2.4V 1amp krypton bulbs. Made by the Thorn Lighting Company, Great Britain. Size 5″ x 5″ x 1 1/2″ inches. These were stocked in the lamproom in all collieries for spares and repairs to the miners cap lamps.